Audio Tools

Why Is My Recording So Quiet – and How to Make It Louder Without Distortion

Quiet recordings are frustrating: you turn the volume to maximum and still struggle to hear. Here is why it happens and how to boost it the right way.

In this article
  1. Why recordings come out quiet
  2. Decibels in one minute
  3. Normalise: the safest boost
  4. When normalising is not enough
  5. Making audio quieter
  6. Record better next time
  7. A note on streaming loudness

Why recordings come out quiet

  • Distance: sound gets much weaker as you move away. Doubling the distance from the microphone makes the voice roughly four times weaker in power.
  • Automatic gain: phones and laptops lower the input level to avoid distortion, especially in noisy rooms.
  • Cautious apps: some recording apps leave plenty of headroom, so the loudest moment is far below the maximum.
  • Converted files: some conversions reduce volume to avoid clipping.
Volume BoosterMake quiet MP3 or WAV files louder, turn loud ones down, or normalize to the maximum level without distortion. See the peak level before you change it.
Open the free tool

Decibels in one minute

Digital audio has a ceiling called 0 dBFS (decibels relative to full scale). Nothing can go louder; anything that tries is “clipped” and sounds crackly and harsh. Levels are measured in negative numbers below that ceiling. A recording that peaks at −15 dBFS has 15 dB of unused space. Adding about 6 dB roughly doubles the signal level; 10 dB sounds roughly twice as loud to our ears.

Normalise: the safest boost

Normalising finds the loudest moment in your recording and raises everything by the same amount so that moment lands just below the ceiling – −1 dBFS is a common target. It is the biggest boost possible without any distortion.

  1. Open Change Audio Volume and drop in your recording.
  2. Look at the peak meter: it shows how loud the loudest point is now.
  3. Click Normalize, or choose a change between −20 dB and +20 dB.
  4. Save as MP3 or WAV and listen.

If you ask for more boost than the recording can take, the tool caps it automatically to protect against distortion.

When normalising is not enough

If a recording has one loud moment – a cough, a door slam, a laugh – normalising can only raise the rest until that moment hits the ceiling. Two fixes:

  • Cut the loud moment out with the Audio Cutter, then normalise.
  • Split the recording and adjust each part separately, then rejoin with Merge Audio.

Boosting also makes background noise louder. A quiet voice in a noisy room becomes a louder voice in a louder noisy room.

Making audio quieter

The same tool lowers volume too – useful when background music is overpowering a voice in a mix, or when a clip is distorted and you want to tame it before further editing. Reducing volume cannot repair clipping that is already recorded, though.

Record better next time

  • Hold the phone 15–25 cm from your mouth, slightly to the side to avoid “p” pops.
  • Record in a small room with soft furnishings; avoid bathrooms and empty halls.
  • Use a headset or clip-on microphone for interviews and lectures.
  • Do a 10-second test and play it back before the real recording.

The Voice Recorder shows a level meter while you record, so you can see when you are too quiet or too loud.

A note on streaming loudness

Music and podcast platforms measure loudness with a different scale called LUFS and adjust tracks to a target (around −14 LUFS on Spotify and YouTube). Peak normalising is not the same thing, but it is a perfectly good first step for everyday recordings.

Volume BoosterMake quiet MP3 or WAV files louder, turn loud ones down, or normalize to the maximum level without distortion. See the peak level before you change it.
Open the free tool
Keep reading

Related articles

All articles
Audio

MP3, WAV, M4A, OGG or FLAC? Audio Formats Explained Simply

A voice note will not play in the car, a podcast editor rejects your file, an upload form wants “MP3 only”. Knowing the formats makes all of these easy to fix.

3 min read
Audio

How to Make a Ringtone from Any Song or Recording

Your favourite chorus, your child saying “Mama, phone!”, a short tune you recorded – any audio can become a ringtone with a quick cut and a gentle fade.

3 min read
Audio

Fade In and Fade Out: The Easiest Way to Make Audio Sound Professional

A clip that starts with a click or stops dead sounds unfinished. A short, well-chosen fade fixes it instantly – here is how long to make it.

3 min read